To repair a dripping tap, you will need the following tools and materials:
- Adjustable spanner
- Screwdriver
- Replacement tap washer
Instructions:
- Turn off the water supply to the tap. You can usually do this by turning a valve under the sink.
- Remove the tap head. This is usually done by unscrewing the cap at the top of the tap.
- Locate the tap washer. This is a small rubber washer that sits at the base of the tap head.
- Remove the old tap washer and replace it with a new one.
- Screw the tap head back on.
- Turn on the water supply and check for leaks.
If the tap is still dripping, you may need to tighten the tap head or replace the tap spindle. The tap spindle is the metal rod that goes through the tap head and turns on and off the water flow.
To tighten the tap head, use an adjustable spanner to tighten the nut at the base of the tap head. Be careful not to over-tighten the nut, as this could damage the tap.
To replace the tap spindle, you will need to remove the tap head and then unscrew the nut that holds the tap spindle in place. Once you have removed the tap spindle, you can replace it with a new one.
If you are not comfortable repairing a dripping tap yourself, you can always call a plumber. However, repairing a dripping tap is a relatively simple job that most people can do with the right tools and materials.
Here are some additional tips for repairing a dripping tap:
- Make sure to use a replacement tap washer that is the correct size for your tap.
- If the tap washer is worn or damaged, it will need to be replaced.
- If the tap spindle is worn or damaged, it will also need to be replaced.
- Be careful not to over-tighten any of the nuts, as this could damage the tap.
- If you are unsure about how to repair a dripping tap, it is best to consult a qualified plumber.